Custom brass bushings.
Drawing-led review for brass sleeves, flanged bushings and turned components, with material and fit requirements defined before quotation.
Custom bushings and sleeves, made to the fit.
A drawing-based brass bushing project starts with the bore, outside diameter, length and mating requirements. Include any flange, shoulder, groove or thread so the manufacturing scope is clear.
If you need a standard bearing or catalog component, identify the standard or part number. A custom-machined brass sleeve is not automatically interchangeable with a specified bearing material or a sintered bronze product.
Specify the brass alloy.
Use an exact material grade where it is known. Brass grades differ in composition and machinability, and the application may impose restrictions on lead content or other substances.
If the part is used in fluid contact, electrical assemblies or a regulated product, state the relevant material and compliance requirements before quotation. Any documentary requirement needs to be confirmed with the manufacturing source.
Interfaces and finishing.
Identify critical bore and outside-diameter requirements, the datum structure and the intended assembly fit. If a dimension must be met after plating or another treatment, state that on the drawing.
Deburring, cleanliness, chamfers and edge conditions are worth specifying on small turned components. If you require a particular appearance or packaging method, include it in the RFQ.
- Plain and flanged sleeves
- Stepped and threaded bushings
- Drawing-based grooves or cross features
- Samples and repeat batches, subject to project review
Build a useful RFQ.
Send the drawing, material grade, quantity and target date. Add the assembly function if you need help resolving material or fit questions.
Use quantity breaks if you are comparing an initial sample run with a follow-on order. The accepted quantity and process are confirmed in the quotation.
Before the quotation.
Can you supply to a custom bore and outside diameter?
Submit the dimensioned drawing, material and accepted fit requirements. The quotation confirms the manufacturing and inspection route for those dimensions.
Can I substitute brass for bronze?
Do not treat the two as interchangeable without checking the application. Material selection should consider load, wear, environment, lubrication and any specified standard.
Can plating be included?
Describe the coating, thickness and dimensions that apply after treatment. Suitability and availability are reviewed with the rest of the project requirements.
Ready to review your part?
Share the drawing, material, quantity and the questions you need to resolve.